Login or create an account
CloseReturning Customer
I am a returning customer
Login or create an account
CloseRegister Account
If you already have an account with us, please login at the login form.
Your Account Has Been Created!
Thank you for registering with asmartelecs!
You will be notified by e-mail once your account has been activated by the store owner.
If you have ANY questions about the operation of this online shop, please contact the store owner.
Account Logout
You have been logged off your account. It is now safe to leave the computer.
Your shopping cart has been saved, the items inside it will be restored whenever you log back into your account.
2.13inch E-Ink Display HAT
$19.73
212x104, 2.13inch E-Ink display HAT for Raspberry Pi, yellow/black/white three-color, SPI interface
Overview
This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 212x104 resolution, with embedded controller, communicating via SPI interface, supports yellow, black, and white three-color display.
Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
2.13inch e-Paper HAT (C) Features
- No backlight, keeps displaying last content for a long time even when power down
- Ultra low power consumption, basically power is only required for refreshing
- Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+
- Preserved solder pads for SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
- Onboard voltage translator, compatible with 3.3V/5V MCUs
- Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
2.13inch e-Paper HAT (C) Specifications
- Operating voltage: 3.3V/5V
- Interface: 3-wire SPI, 4-wire SPI
- Outline dimension: 65mm × 30.2mm
- Display size: 23.71mm × 48.55mm
- Dot pitch: 0.229 × 0.228
- Resolution: 212 × 104
- Display color: yellow, black, white
- Grey level: 2
- Full refresh time: 15s
- Refresh power: 26.4mW(typ.)
- Standby power: <0.017mW
- Viewing angle: >170°
Interface
| SYMBOL | DESCRIPTION |
|---|---|
| VCC | 3.3V/5V |
| GND | Ground |
| NC | NC |
| DIN | SPI MOSI pin |
| CLK | SPI SCK pin |
| CS | SPI chip selection, low active |
| DC | Data/Command selection (high for data, low for command) |
| RST | External reset, low active |
| BUSY | Busy status output, low active |
Dimensions
Development Resources
Selection Guide
| Part Number | Colors | Grey Level | Resolution | Display size (mm) | Outline Dimension (mm) | Full Refresh Time (s) | Partial Refresh Time (s) | Pi Header1 | Interface |
|---|---|---|---|---|---|---|---|---|---|
| 1.54inch e-Paper Module | black, white | 2 | 200x200 | 27.60 × 27.60 | 48.0 × 33.0 | 2 | 0.3 | × | SPI |
| 1.54inch e-Paper Module (B) | red, black, white | 2 | 200x200 | 27.60 × 27.60 | 48.0 × 33.0 | 8 | N/A | × | SPI |
| 1.54inch e-Paper Module (C) | yellow, black, white | 2 | 152x152 | 27.51 × 27.51 | 48.0 × 33.0 | 27 | N/A | × | SPI |
| 2.13inch e-Paper HAT | black, white | 2 | 250x122 | 48.55 × 23.71 | 65.0 × 30.2 | 2 | 0.3 | √ | SPI |
| 2.13inch e-Paper HAT (B) | red, black, white | 2 | 212x104 | 48.55 × 23.71 | 65.0 × 30.2 | 15 | N/A | √ | SPI |
| 2.13inch e-Paper HAT (C) | yellow, black, white | 2 | 212x104 | 48.55 × 23.71 | 65.0 × 30.2 | 15 | N/A | √ | SPI |
| 2.13inch e-Paper HAT (D) | black, white | 2 | 212x104 | 48.55 × 23.71 | 59.2 × 29.2 | 2 | 0.3 | √ | SPI |
| 2.7inch e-Paper HAT | black, white | 2 | 264x176 | 57.29 × 38.19 | 85.0 × 56.0 | 6 | N/A | √ | SPI |
| 2.7inch e-Paper HAT (B) | red, black, white | 2 | 264x176 | 57.29 × 38.19 | 85.0 × 56.0 | 15 | N/A | √ | SPI |
| 2.9inch e-Paper Module | black, white | 2 | 296x128 | 66.89 × 29.05 | 89.5 × 38.0 | 2 | 0.3 | × | SPI |
| 2.9inch e-Paper Module (B) | red, black, white | 2 | 296x128 | 66.89 × 29.05 | 89.5 × 38.0 | 15 | N/A | × | SPI |
| 2.9inch e-Paper Module (C) | yellow, black, white | 2 | 296x128 | 66.89 × 29.05 | 89.5 × 38.0 | 15 | N/A | × | SPI |
| 4.2inch e-Paper Module | black, white | 2 | 400x300 | 84.80 × 63.60 | 103.0 × 78.5 | 4 | N/A | × | SPI |
| 4.2inch e-Paper Module (B) | red, black, white | 2 | 400x300 | 84.80 × 63.60 | 103.0 × 78.5 | 15 | N/A | × | SPI |
| 4.2inch e-Paper Module (C) | yellow, black, white | 2 | 400x300 | 84.80 × 63.60 | 103.0 × 78.5 | 15 | N/A | × | SPI |
| 4.3inch e-Paper UART Module | black, white | 4 | 800x600 | 88.00 × 66.00 | 118.0 × 75.0 | 1.5 | N/A | × | UART |
| 5.83inch e-Paper HAT | black, white | 2 | 600x448 | 118.8 × 88.26 | 125.4 × 99.5 | 3.5 | N/A | √ | SPI |
| 5.83inch e-Paper HAT (B) | red, black, white | 2 | 600x448 | 118.8 × 88.26 | 125.4 × 99.5 | 14 | N/A | √ | SPI |
| 5.83inch e-Paper HAT (C) | yellow, black, white | 2 | 600x448 | 118.8 × 88.26 | 125.4 × 99.5 | 26 | N/A | √ | SPI |
| 7.5inch e-Paper HAT | black, white | 2 | 640x384 | 163.20 × 97.92 | 170.2 × 111.2 | 6 | N/A | √ | SPI |
| 7.5inch e-Paper HAT (B) | red, black, white | 2 | 640x384 | 163.20 × 97.92 | 170.2 × 111.2 | 16 | N/A | √ | SPI |
| 7.5inch e-Paper HAT (C) | yellow, black, white | 2 | 640x384 | 163.20 × 97.92 | 170.2 × 111.2 | 16 | N/A | √ | SPI |
| 9.7inch e-Paper HAT | black, white | 16 | 1200x825 | 202.8 × 139.43 | 218.8×156.4 | <1 | 0.3 | √ | USB/SPI/ I80/I2C |
- Standard Raspberry Pi header on module, allowed to be attached onto Pi directly, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+